Peeking Snowman

I love snowmen. This one is peeking in the window of a cabin. My tutorial includes the materials I used, but feel free to change it up and use markers, crayons, or any other art material you want. Affiliate links below. 

Peeking Snowman

Materials: 

• watercolor paper
• Folk Art acrylic paint - Light Blue
• pencil
• Apple Barrel Paint Pens
• centering ruler

Steps: 

Cut the paper to the size and shape of the window you want. Use a wet brush to moisten the area where the sky goes, then brush a small amount of Light Blue paint horizontally onto the paper. Let the paint dry completely. 

Use a pencil to sketch the outline of the snowman. Use paint pens to color the snowman's hat, scarf, arms, eyes, nose, mouth, and buttons. Add trees - small ones in the background and a larger one in the foreground. I added shadows with the pencil. 

With a brown paint pen, make a window sill by coloring each edge of the paper. Use the centering ruler to mark the center of each edge. Draw a vertical and a horizontal line through those center points to finish the window.  

Decorated Cinnamon Ornaments, Three Ways

Have you ever made the classic cinnamon ornaments? They are fun and easy to make and they smell absolutely amazing. I've made cinnamon ornaments a handful of times, but this time I wanted to experiment with decorating them in three different ways. The results were really interesting! Affiliate links below. 

Cinnamon Ornaments

Materials: 

• 1 container cinnamon (2.37 oz)
• 6 tablespoons applesauce
• plastic wrap
• Christmas cookie cutters
• straw
• needle file
• Folk Art paint, Titanium White
• Folk Art Dots, Whisper White
• Apple Barrel Paint Pens
• twine

Steps: 

Mix the cinnamon and 5 tablespoons of applesauce in a bowl. Add the remaining applesauce if needed to make a smooth ball of dough. (Note: Some people add a tablespoon or two of Elmer's Glue to the dough, allegedly to help the ornaments last longer. I don't find this necessary, but go ahead and try it if you want.)

Roll out dough between two sheets of plastic wrap, to approximately 1/4" thick. Peel off the top sheet of plastic wrap, then cut ornaments from the dough. Use a straw to poke a hole in the top of each. Transfer your ornaments to a baking sheet. Ball up the scrap dough and repeat the steps until the dough is gone. Bake the ornaments at 200°F for about 2 hours. (Alternately, you can air dry them on a wire rack. It will take a day or two.)

Use a needle file to smooth any rough edges. You can see that the tree ornament below has some extra material (especially on the bottom branches) that needs to be removed. This task only takes a minute or two and it smells amazing. 

This is what all of my ornaments looked like after filing. See how much cleaner the tree looks? (Bottom left). 

On to decorating! I used three different products by Plaid to decorate my ornaments. I used Dots for the gingerbread man, star, and dotted tree; the paint pen for the snowman and holly leaf; and the paint for the bell and the other tree. 

As I was decorating, I was comparing the merits of each method. I found the Dots most difficult to control, but you can't beat the vibrancy and coverage. With practice, I could probably do better than the uneven dots and lines I made. The paint pen was the easiest to control, perfect for little details, but I had to let the first coat dry and do a second coat in order to get full coverage. The paint had good opacity and it was relatively easy to make simple lines and designs with a liner brush. 

I let everything dry overnight and ended up with this: 

The ones done with the paint pen are slightly less vibrant, but look at those tiny details. Now that I've tried them all, I'd recommend the paint pen for children, the paint or a paint pen for teens, and the Dots for cake decorators and other people who have spent a lot of time practicing squeezing with uniform pressure. 

The final step is adding hangers to your ornaments. I like the look of twine with these, but you can use ribbon, cording, or whatever else you want. 

The ornaments will last indefinitely, but their scent will fade over time. There are two ways to keep them smelling just as good as when you made them. The first is to gently file the edges and back each year before hanging them on the tree. This will, of course, make the ornaments smaller over time and will eventually cause them to break. Alternately, you can add a tiny drop of cinnamon oil to the back of the ornaments. 

Minnesota and North Carolina Craft Stick Flag Coasters

As promised, here are two more coasters featuring state flags. Today I'm sharing coasters featuring the flags of Minnesota and North Carolina. I'm especially happy to share the Minnesota project, since it is the most recently adopted of the 50 state flags. (Maine, I'm still disappointed.) Affiliate links below.   

 

Minnesota and North Carolina Flag Coasters

Materials: 

• 7 standard size (4.5") craft sticks
• painter's tape
• acrylic paint (Minnesota: navy, light blue / North Carolina: navy, red, white)
• colored pencils
• Apple Barrel Paint Pens (Minnesota: white / North Carolina: yellow, white)
• Outdoor Mod Podge
• tacky glue
• 3 mini (2.5") craft sticks

Steps (Minnesota): 

Arrange seven standard size craft sticks on a piece of painter's tape. Use a ruler and pencil to draw lines to mark the Minnesota-shaped dark blue field. Paint the field navy and the rest of the area light blue. When the paint is dry, remove the sticks from the tape and paint the edges. They will show through in your finished coaster. The back won't show, so painting that is optional. Let the paint dry. Return the sticks to the painter's tape. 

I used a white colored pencil to freehand the 8-pointed star, but it would have been infinitely easier to print and cut a template, then trace that. Use a white paint pen to fill in the star. 

When the paint is dry, seal the sticks with Outdoor Mod Podge and let that dry completely. 

Arrange three mini craft sticks vertically on your work surface and add glue. One by one, transfer the painted craft sticks onto this base. 

Steps (North Carolina): 

Arrange seven standard size craft sticks on a piece of painter's tape. Paint the left third of the sticks navy blue. Paint the right two-thirds of the top three sticks red and the bottom three sticks white. The middle stick is split, half red and half white. I recommend labeling the sections in pencil to help you. 

Remove the sticks from the painter's tape and paint the edges, as these will show. When the paint is dry, return the sticks to the painter's tape. 

It took quite a bit of trial and error to figure out the best way to do the details on this flag. I suggested starting with the N☆C, using yellow and white paint pens. Use the yellow paint pen to draw the banners above and below. When the paint is 100% completely dry, add the text using a ballpoint pen. 

Seal the sticks with Outdoor Mod Podge and let that dry completely. 

Arrange three mini craft sticks vertically on your work surface and add glue. One by one, transfer the painted craft sticks onto this base. 

You may have noticed that I didn't make coasters from amongst the Excellent state flags for crafting but instead chose flags from the Acceptable group. They were more challenging than I'd expected, so I'd steer clear of anything in the Terrible group. I have high hopes that at least some of them will update their flags eventually, like Minnesota did. 

Georgia and Indiana Craft Stick Flag Coasters

I'm trying to diversify the set of crafts I have made inspired by each state, so that people who visit each individual state's page have a wider variety of projects to choose from. I decided to make four more craft stick coasters, similar to the United States flag coaster and California's Bear Flag Coaster that I've previously posted. Today I'm sharing coasters featuring the flags of Georgia and Indiana. Affiliate links below.   

 

Georgia and Indiana Flag Coasters

Materials: 

• 7 standard size (4.5") craft sticks
• painter's tape
• acrylic paint (Georgia: navy, red, white / Indiana: navy)
• colored pencils
• Apple Barrel Paint Pens (Georgia: yellow, white / Indiana: yellow)
• Outdoor Mod Podge
• tacky glue
• 3 mini (2.5") craft sticks

Steps (Georgia): 

Arrange seven standard size craft sticks on a piece of painter's tape. Paint the sticks with a blue field and red, white, and red stripes. I recommend using a ruler and pencil to draw the lines and label the sections before painting. 

When the paint is dry, remove the sticks from the tape and paint the edges. They will show through in your finished coaster. The back won't show, so painting that is optional. Let the paint dry. 

Return the sticks to the painter's tape. Use a white colored pencil to draw where the stars will go and a yellow colored pencil to draw a simplified version of the coat of arms. Trace over each with paint pens. 

When the paint is dry, seal the sticks with Outdoor Mod Podge and let that dry completely. 

Arrange three mini craft sticks vertically on your work surface and add glue. One by one, transfer the painted craft sticks onto this base. 

Steps (Indiana): 

Paint seven standard size craft sticks navy blue. Be sure to paint the edges, as these will show. When the paint is dry, line up the sticks on a piece of painter's tape. 

Print a copy of the Indiana flag, sized to 4.5" x 3" (the approximate size of the finished coaster. Scribble on the back of the design with a white colored pencil. Place the printed flag, correct side up, on the taped craft sticks. Trace the basic lines of the design and put a dot where each star goes. This will transfer white guide lines to the navy-painted sticks. 

Trace over each of the lines with a yellow paint pen, then draw stars over each dot. Use a very sharp yellow colored pencil to write INDIANA near the top. 

When the paint is dry, seal the sticks with Outdoor Mod Podge and let that dry completely. 

Arrange three mini craft sticks vertically on your work surface and add glue. One by one, transfer the painted craft sticks onto this base. 

Tomorrow I'll share the other two coasters I made. 

Underwater Scene: Paint Markers on Aluminum Foil

When I reviewed the new Ohuhu Nahuku Acrylic Markers, I was impressed by how well they color on paper, plastic, and metal. Ohuhu sent me a different set, the Kakaako Acrylic Markers, to try and I was eager to see if they performed as well. I'm happy to report that they impress me too. I'm not surprised, as Ohuhu's products are consistently high quality and a pleasure to use. Affiliate links here and below. 

The Kakaako set includes 30 double-ended acrylic markers: 15 basic colors, 9 metallics, and 6 fluorescents. Unlike the Nahukus with their brush nibs, the Kakaakos are what I think of as a traditional paint pen. To activate the paint, you shake the pen, then press down on the round or fine tip until the color is flowing. These pens are made to color on a wide variety of surfaces, including: paper, plastic, glass, ceramic, rocks, wood, fabric, and more. I decided to test "and more" with a more unconventional surface: aluminum foil. 

I cut an 8" square of aluminum foil, then colored the background with patches of color from four different blue pens. The paint dries fairly quickly, but there is enough open time that you can fingerpaint if you want to. I used my index finger to soften and blend the background in some places. I intentionally let the foil show through in many spots. You can't tell on the scan, but it's super shiny in real life. 

I used the round tip to add a sea floor, kelp, coral, and fish. Then I went in with the fine tips to add a bit of detail. The paint layers nicely if you let the base coat(s) dry first. 

Here's a look at the full color palette and how each looks on white and black cardstock. You can also see how the coverage is with a single coat. 

Just like the Nahukus, I definitely recommend Ohuhu's Kakaako Acrylic Markers but once again feel that using them on paper would be a waste. Try them on a wide variety of surfaces, including aluminum foil!