1/30/15

Twisteezwire Critters

I was browsing the Twisteezwire website while writing up my review of their Mask Kit when their Puzzle Piece Bug tutorial caught my eye. I'm always on the lookout for fun crafts using puzzle pieces! (You may recall the ridiculous situation with a puzzle purchase awhile back that resulted in me having a large stash of useless puzzle pieces.) I showed the tutorial to Trevor and he was totally onboard with the idea of making puzzle piece Twisteezwire bugs. 

We each started by choosing a puzzle piece and a Twisteezwire. We followed the steps to make three sets of legs to create a basic insect. We continued with the antenna. Then we used Glue Dots to attach googly eyes. With the basic technique mastered, we were able to use our own creativity to make some totally cute (if I do say so myself!) critters. Introducing....
  

Dot, the Ladybug
(by Cindy)


To make Dot, you need a red puzzle piece, 3 Twisteezwires (red, black, and white), six red beads, two googly eyes, glue dots, six black sequins, glue, and wax paper. Make a basic bug with the puzzle piece, red legs, and black antenna. Slide a bead about 1/2 inch up each leg and twist to secure. Add eyes. Create wings by looping the white wire, sliding it through a set of legs on the underside of Dot, then forming another loop. Tear two small pieces of wax paper that are slightly larger than the loops. Put glue on the back of the loops, then attach the wax paper. Let the glue dry completely, then trim the excess wax paper away from the loops. Glue the sequins to Dot's back.



Buggy, the Bug
(by Trevor)


To make Buggy, you need an orange puzzle piece, two Twisteezwires (green and orange), six orange buttons, two googly eyes, and glue dots. Make a basic bug with oversize antenna. Thread each leg through the button holes, then twist to secure. Add eyes.



Chesapeake, the Blue Crab
(by Cindy)


To make Chesapeake, you need a neutral-colored puzzle piece, Twisteezwire (blue and black), eight blue beads, two black beads, glue dots and googly eyes. Start by making a basic bug. Add a bead to each of the middle and back legs, twisting to secure. Add two beads each to the front two legs to form claws. Cut a small length of black wire for the eye stalks and attach like you would antenna. Glue googly eyes in place.



Spinner, the Spider
(by Trevor)


To make Spinner, you need a neutral puzzle piece, tan Twisteezwire, a large black pom pom, a medium black pom pom, glue, glue dots, and googly eyes. Begin by cutting the tan Twisteezwire into fourths, not thirds like usual. Attach the first three sets of legs as usual, and add the final set of legs opposite the third set, using the same technique. Bend up the end of each leg slightly to allow Spinner to balance. Glue the large pom pom onto the back of the puzzle piece and the medium pom pom onto the front. Use glue dots to attach the googly eyes to the face.

........

What do you think? Any favorites? Trevor is already talking about the next set of critters we're going to make!

3 comments:

I moderate comments, so you will not see yours appear right away. Please check back if you had a question; I promise to answer it as soon as I see it. Thank you for taking the time to comment!